MSL Works Forums - Pin-out for UFPI nand socket

I notice at http://mslw.com/wp-content/uploads/ufpi_...nd_sch.jpg that the socket adapter is missing a pin for Write Protect (WP). It just says connect it to Vcc (power). Is there no WP pin on the 30 pin out ?

WP tsop48 -19pin

(07-04-2020, 01:40)merkulss Wrote: [ -> ]WP tsop48 -19pin

tsop48's WP is 19, but is WP also pin 19 on the UFPI BGA63 adapter in the schematics linked above?

also, would the pins be numbered like this?
::|[board] 1,2
3,4

Thanks again.

For nand bga63 pinout
https://images.app.goo.gl/EbYhxmvdt85RmZTH7

(08-04-2020, 01:01)merkulss Wrote: [ -> ]For nand bga63 pinout
https://images.app.goo.gl/EbYhxmvdt85RmZTH7

I am using this socket: https://mslw.com/product/nand-tsop48-pinboard/

I do not have the UFPI device, as I am using an FTDI2232 serial to USB breakout board.

What I'm wondering is which pin on the socket would be Write Protect (WP)

(08-04-2020, 08:02)pwnasaurus Wrote: [ -> ]What I'm wondering is which pin on the socket would be Write Protect (WP)

http://mslw.com/wp-content/uploads/ufpi_...nd_sch.jpg
WP connected to VCC