RE: eMMC RT809H 8-Bit PCB RT-BGA169-01 V2.3 EMMC - manyizoli - 08-11-2021
ISP mode, with external power supply, VCC, VCCQ.
External power supply is USB powered AMS1117 3,3V and AMS1117 1,8V voltage regulator mounted on test panel.
RE: eMMC RT809H 8-Bit PCB RT-BGA169-01 V2.3 EMMC - manyizoli - 15-11-2021
(11-04-2021, 01:47)merkulss Wrote: (11-04-2021, 01:15)manyizoli Wrote: Could i upgrade silver to pro? No, only Black UFPI or PCB Pro.
https://mslw.com/product/ufpi-box-black/
Show ContentSpoiler:
UFPI Black
$399.00
This is an unlimited UFPI box version with licenses for all current and future modules. Life-time warranty and support, free e-mail account at mslw.com. Good way to support UFPI project and forget about future modules activation’s. Sockets not included. UFPI Pro PCB inside! UFPI Pro supports operation with eMMC chips in 8-bit mode.
Don't worry. 4 bit UFPI will be faster than 8 bit competitors. Today, I tested my RT809H, and 4GB emmc read 94 sec 8bit, and write 148 sec 8 bit, if I remember correctly
If I have time do screen shoot. Black UFPI do same time?
Thanks for reply.
I also found such a description
https://eletronicabr.com/forums/topic/236626-rt809-modifica%C3%A7%C3%A3o-interna-para-aumentar-a-velocidade-de-leitura-e-grava%C3%A7%C3%A3o-de-emmc/
RE: eMMC RT809H 8-Bit PCB RT-BGA169-01 V2.3 EMMC - merkulss - 15-11-2021
(15-11-2021, 00:56)manyizoli Wrote: Today, I tested my RT809H, and 4GB emmc read 94 sec 8bit, and write 148 sec 8 bit, if I remember correctly
If I have time do screen shoot. Black UFPI do same time?
Thanks for reply.
I also found such a description A little math lesson for those who have forgotten how to count. 128/4=32. 32*94=3000 is not equal to 2197.
Go ahead and watch the trick: (128*2^30)/2197=62,5 MIB/s.
Is this a joke, or does the rt809 have usb3.0 and the frequency has become >100 MHz? )))
P.S. No one will be able to overtake ufpi, I'm sure, at least on usb2.0.
RE: eMMC RT809H 8-Bit PCB RT-BGA169-01 V2.3 EMMC - manyizoli - 15-11-2021
I take picture.
RE: eMMC RT809H 8-Bit PCB RT-BGA169-01 V2.3 EMMC - merkulss - 15-11-2021
(15-11-2021, 11:39)manyizoli Wrote: I take picture Well, find the error. You have everything in your hands. There is no such thing as magic. The screenshots don't confirm anything.
RE: eMMC RT809H 8-Bit PCB RT-BGA169-01 V2.3 EMMC - bbadmin - 15-11-2021
(15-11-2021, 00:56)manyizoli Wrote: Today, I tested my RT809H, and 4GB emmc read 94 sec 8bit, and write 148 sec 8 bit, if I remember correctly
If I have time do screen shoot. Black UFPI do same time?
Thanks for reply.
I also found such a description
https://eletronicabr.com/forums/topic/23...o-de-emmc/
With eMMC in 8-bit mode all programmers (with HS USB2.0) will be limited with the same maximum speed ~37 MiB/sec. This is USB2 speed limit (+- 2MiB/sec, depends on PC). KiB it's 1024 bytes, MiB it's 1024 KiB.
If you are looking for faster speed's - turn on Async IO, and "One request" in Read mode menu and faster clock. And you can get good result in 4-bit mode, example:
Show Contentfast read in 4-bit mode:
UFPI socket type MMC, max. bus 8-Bit
eMMC ID 150100303030303030032011122800CD, DAT0-DAT7
eMMC Info Samsung '000000', size 3.64 GiB, SN 20111228, Unk 2013
eMMC Mode 4-Bit, Transfer state, TI 1, Drv 0, Clock 90MHz
eMMC detailed information:
OCR 0xC0FF8080 (3V3/1V8)
CID 150100303030303030032011122800CD (Samsung 000000, SN 0x20111228 (537989672), Unk 2013)
CSD D02701320F5903FFF6DBFFE78A404057
Device Revision [192] 0x05 (MMC v4.41)
Device Type [196] 0x07 (SDR HS52)
Command Classes 0xF5 (Class 0, 2, 4, 5, 6, 7)
Transfer Speed 0x32 (26MHz)
Reset Function [162] 0x00 (Temporarily disabled (default))
Boot Config [179] 0x00 (No Boot, access to USER)
Boot Bus [177] 0x00 (1-Bit SDR, Reset to 1-Bit)
Partitioning support [160] 0x03 (Yes, ENH)
Partitioning completed [155] 0x00 (NO)
USER Partition, size 0x00E9000000 (3.64 GiB)
BOOT1 Partition, size 0x0000100000 (1 MiB)
BOOT2 Partition, size 0x0000100000 (1 MiB)
RPMB Partition, size 0x0000020000 (128 KiB) OFF
eMMC Bus width 4-Bit
eMMC Bus config...OK
eMMC Clock settings User (90MHz)
eMMC Clock change OK
Data saving to File 'C:\UFPI\Dumps\SDMMC\flash_out.bin'...OK
User task flags Async IO CRC32
eMMC Read Mode 'Multiple Blocks (One request)'
Reading eMMC USER from 0x00000000, size 0xE9000000...OK
Checksum CRC32 0x946AD44E
Completed in 1 min. 46 sec. Code download speed 35.13 MiB/sec.
p.s. Also funny what RT809 now have Sync/Async mode-)))
RE: eMMC RT809H 8-Bit PCB RT-BGA169-01 V2.3 EMMC - manyizoli - 15-11-2021
Hi bbadmin,
Thanks for your answer, I will test your advice (turn on Async IO, and "One request" in Read mode menu and faster clock).
I have UFPI silver two licences (mount file, mount chip), but I like UFPI black, but I dont know it is good idea (UFPI black 400 dollars, and I will have two UFPI).
I tested
Show ContentSpoiler:
eMMC Read Mode 'Multiple Blocks (One request)' OK
UFPI socket type MMC, max. bus 4-Bit
eMMC ID 90014A483447316404030159A48D511F, DAT0-DAT3
eMMC Info Hynix 'H4G1d', size 3.64 GiB, SN 0159A48D, May 2014
eMMC Mode 4-Bit, Transfer state, TI 1, Drv 0, Clock 52MHz
eMMC detailed information:
OCR 0xC0FF8080 (3V3/1V8)
CID 90014A483447316404030159A48D511F (Hynix H4G1d, SN 0x0159A48D (22652045), May 2014)
CSD D02701320F5903FFFFFFFFEF8A4040D3
Device Revision [192] 0x06 (MMC v4.5, v4.51)
Device Type [196] 0x17 (SDR HS52, HS200)
Command Classes 0xF5 (Class 0, 2, 4, 5, 6, 7)
Transfer Speed 0x32 (26MHz)
Reset Function [162] 0x01 (Permanently enabled)
Boot Config [179] 0x78 (Boot from USER, access to USER, ACK)
Boot Bus [177] 0x00 (1-Bit SDR, Reset to 1-Bit)
Partitioning support [160] 0x07 (Yes, ENH, EXT)
Partitioning completed [155] 0x00 (NO)
USER Partition, size 0x00E9000000 (3.64 GiB)
BOOT1 Partition, size 0x0000400000 (4 MiB)
BOOT2 Partition, size 0x0000400000 (4 MiB)
RPMB Partition, size 0x0000400000 (4 MiB) Authentication Key not programmed
eMMC Dump, 512 byte(s) (USER)
00000000 71 00 00 EA 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 | q..ê.ð.å.ð.å.ð.å
00000010 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 | .ð.å.ð.å.ð.å.ð.å
00000020 CC 01 00 FB 98 01 00 FB 9C 01 00 FB A0 01 00 FB | Ì..û...û...û ..û
00000030 A4 01 00 FB A8 01 00 FB AC 01 00 FB B0 01 00 FB | ¤..û¨..û¬..û°..û
00000040 00 00 A0 E3 15 0F 07 EE 10 0F 11 EE 01 0A C0 E3 | .. ã...î...î..Àã
00000050 10 0F 01 EE 00 F0 20 E3 00 F0 20 E3 00 F0 20 E3 | ...î.ð ã.ð ã.ð ã
00000060 00 F0 20 E3 00 F0 20 E3 00 F0 20 E3 00 F0 20 E3 | .ð ã.ð ã.ð ã.ð ã
00000070 00 F0 20 E3 28 00 9F E5 01 10 A0 E3 00 10 80 E5 | .ð ã(..å.. ã...å
00000080 00 F0 20 E3 00 F0 20 E3 00 F0 20 E3 00 F0 20 E3 | .ð ã.ð ã.ð ã.ð ã
00000090 00 F0 20 E3 00 F0 20 E3 00 F0 20 E3 00 F0 20 E3 | .ð ã.ð ã.ð ã.ð ã
000000A0 49 00 00 EA 1C 80 00 F0 00 00 00 00 00 00 00 00 | I..ê...ð........
000000B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
000000C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
000000D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
000000E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
000000F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00000100 4D 54 4B 2F 44 54 56 2F 52 4F 4D 43 4F 44 45 2F | MTK/DTV/ROMCODE/
00000110 4D 53 44 43 42 4F 4F 54 2F 56 30 31 2E 30 30 00 | MSDCBOOT/V01.00.
00000120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00000130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00000140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00000180 0A 0D 53 74 61 72 74 20 50 6D 61 69 6E 0A 0D 00 | ..Start Pmain...
00000190 0A 0D 48 6C 74 0A 0D 00 05 00 00 EA 04 00 00 EA | ..Hlt......ê...ê
000001A0 03 00 00 EA 02 00 00 EA 01 00 00 EA 00 00 00 EA | ...ê...ê...ê...ê
000001B0 FF FF FF EA B0 1F 10 EE 06 01 A0 E3 01 00 50 E1 | ÿÿÿê°..î.. ã..Pá
000001C0 FB FF FF 1A E0 11 9F E5 31 FF 2F E1 D3 10 A0 E3 | ûÿÿ.à..å1ÿ/áÓ. ã
000001D0 01 F0 21 E1 10 0F 11 EE 01 0A C0 E3 04 00 C0 E3 | .ð!á...î..Àã..Àã
000001E0 01 00 C0 E3 02 0B 80 E3 10 0F 01 EE B0 1F 10 EE | ..Àã...ã...î°..î
000001F0 06 01 A0 E3 01 00 50 E1 0F 00 00 1A AC 01 9F E5 | .. ã..Pá....¬..å
eMMC Full Backup...3.65 GiB
Current Directory 'C:\Users\manyi\Desktop\Új mappa'
Data saving to File 'emmc_backup.txt'...OK
Data saving to File 'cid_backup.bin'...OK
Data saving to File 'csd_backup.bin'...OK
Data saving to File 'ext_csd_backup.bin'...OK
Data saving to File 'BOOT1_0x0000000000_0x0000400000_backup.bin'...OK
Reading eMMC BOOT1 from 0x00000000, size 0x00400000...OK
Completed in 0.17 second(s). Code download speed 23.53 MiB/sec.
Data saving to File 'BOOT2_0x0000000000_0x0000400000_backup.bin'...OK
Reading eMMC BOOT2 from 0x00000000, size 0x00400000...OK
Completed in 0.17 second(s). Code download speed 23.25 MiB/sec.
Data saving to File 'RPMB_0x0000000000_0x0000400000_backup.bin'...OK
Reading eMMC RPMB from 0x00000000, size 0x00400000...OK
Completed in 1.54 second(s). Code download speed 2.6 MiB/sec.
Data saving to File 'USER_0x0000000000_0x00E9000000_backup.bin'...OK
Reading eMMC USER from 0x00000000, size 0xE9000000...OK
Completed in 2 min. 34 sec. Code download speed 24.1 MiB/sec.
RE: eMMC RT809H 8-Bit PCB RT-BGA169-01 V2.3 EMMC - manyizoli - 23-12-2021
Hi,
Today I tested UFPI_eMMC_ISP board and works fine, I like this.
RE: eMMC RT809H 8-Bit PCB RT-BGA169-01 V2.3 EMMC - sjm - 17-03-2022
https://mslw.com/bb/showthread.php?tid=2282&pid=59918#pid59918
Обращаю внимание на пост 21.
Там на картинке неправильный D3. Я применяю правильное место.
![[Image: rsz-320211107-103401.jpg]](https://i.ibb.co/kB7xVh4/rsz-320211107-103401.jpg)
|
